dmesg - Intel 4 IGP
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-55-generic (buildd@lgw01-42) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74~14.04.1-Ubuntu SMP Tue Nov 17 10:15:59 UTC 2015 (Ubuntu 3.16.0-55.74~14.04.1-generic 3.16.7-ckt19)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdd9ffff] usable
BIOS-e820: [mem 0x00000000bdda0000-0x00000000bddadfff] ACPI data
BIOS-e820: [mem 0x00000000bddae000-0x00000000bddeffff] ACPI NVS
BIOS-e820: [mem 0x00000000bddf0000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard G5210fr/2A8C, BIOS 6.05 08/12/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 base 0BDE00000 mask FFFE00000 uncachable
4 base 0BE000000 mask FFE000000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 4GB, range: 1GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 3038MB, range: 2MB, type UC
reg 4, base: 3040MB, range: 32MB, type UC
total RAM covered: 4062M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3038MB, range: 2MB, type UC
reg 3, base: 3040MB, range: 32MB, type UC
reg 4, base: 4GB, range: 1GB, type WB
e820: update [mem 0xbde00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbdda0 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fbe000, 0x01fbefff] PGTABLE
BRK [0x01fbf000, 0x01fbffff] PGTABLE
BRK [0x01fc0000, 0x01fc0fff] PGTABLE
init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[mem 0x13fe00000-0x13fffffff] page 2M
BRK [0x01fc1000, 0x01fc1fff] PGTABLE
init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[mem 0x13c000000-0x13fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x13bffffff]
[mem 0x100000000-0x13bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbdd9ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbdbfffff] page 2M
[mem 0xbdc00000-0xbdd9ffff] page 4k
RAMDISK: [mem 0x35ad8000-0x36d63fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F9C70 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000BDDA0100 000064 (v01 HPQOEM SLIC-CPC 20100812 MSFT 00000097)
ACPI: FACP 0x00000000BDDA0290 0000F4 (v03 HPQOEM SLIC-CPC 20100812 MSFT 00000097)
ACPI: DSDT 0x00000000BDDA05C0 005A6B (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
ACPI: FACS 0x00000000BDDAE000 000040
ACPI: FACS 0x00000000BDDAE000 000040
ACPI: APIC 0x00000000BDDA0390 00006C (v01 HPQOEM SLIC-CPC 20100812 MSFT 00000097)
ACPI: MCFG 0x00000000BDDA0400 00003C (v01 HPQOEM SLIC-CPC 20100812 MSFT 00000097)
ACPI: SLIC 0x00000000BDDA0440 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
ACPI: OEMB 0x00000000BDDAE040 000072 (v01 HPQOEM SLIC-CPC 20100812 MSFT 00000097)
ACPI: HPET 0x00000000BDDAA670 000038 (v01 HPQOEM SLIC-CPC 20100812 MSFT 00000097)
ACPI: GSCI 0x00000000BDDAE0C0 002024 (v01 HPQOEM SLIC-CPC 20100812 MSFT 00000097)
ACPI: SSDT 0x00000000BDDB0580 000363 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
Initmem setup node 0 [mem 0x00000000-0x13fffffff]
NODE_DATA [mem 0x13fff8000-0x13fffcfff]
[ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x13fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xbdd9ffff]
node 0: [mem 0x100000000-0x13fffffff]
On node 0 totalpages: 1039678
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12087 pages used for memmap
DMA32 zone: 773536 pages, LIFO batch:31
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdda0000-0xbddadfff]
PM: Registered nosave memory: [mem 0xbddae000-0xbddeffff]
PM: Registered nosave memory: [mem 0xbddf0000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s81408 r8192 d20992 u524288
pcpu-alloc: s81408 r8192 d20992 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1023410
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x3, cntxt size 0x240
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3991192K/4158712K available (7635K kernel code, 1131K rwdata, 3616K rodata, 1356K init, 1300K bss, 167520K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:712 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2799.870 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.74 BogoMIPS (lpj=11199480)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
ftrace: allocating 29286 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5500 @ 2.80GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11199.48 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbddae000-0xbddeffff] (270336 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 8:50:23, date: 12/04/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0xC5, should be 0x0F (20140424/tbprint-211)
ACPI: SSDT 0xFFFF880139AAE000 00048A (v01 HPQOEM SLIC-CPC 00000124 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xbde00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf8000-0xfeafbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xd880-0xd89f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xd800-0xd81f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xd480-0xd49f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xd400-0xd41f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfeaf7c00-0xfeaf7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7]
pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb]
pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xd080-0xd087]
pci 0000:00:1f.2: reg 0x14: [io 0xd000-0xd003]
pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07]
pci 0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883]
pci 0000:00:1f.2: reg 0x20: [io 0xc800-0xc80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xfdff0000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xbde00000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdda0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0a00-0x0a0f] has been reserved
system 00:02: [io 0x0a10-0x0a1f] has been reserved
system 00:02: [io 0x0a20-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0800-0x087f] could not be reserved
system 00:03: [io 0x0480-0x04bf] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xffc00000-0xffefffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xbddfffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xbde00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xbde00000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18992K (ffff880035ad8000 - ffff880036d64000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9da0000-0xbdda0000] (64MB) mapped at [ffff8800b9da0000-ffff8800bdd9ffff]
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa07
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa07
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1449219023.444:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 7832
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: Slot #32 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: Slot #33 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G41 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaf7c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-55-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-55-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-55-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-55-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-55-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: c0e79120a193454330069fccfa63e661c83064f8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 11:969:825
rtc_cmos 00:01: setting system clock to 2015-12-04 08:50:23 UTC (1449219023)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata4.01: ATAPI: hp CDDVDW TS-H653R, 0K00, max UDMA/100
ata3.00: ATA-8: WDC WD5000AAKS-08V0A0, 05.01D05, max UDMA/100
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.01: configured for UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:1:0: CD-ROM hp CDDVDW TS-H653R 0K00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:1:0: Attached scsi CD-ROM sr0
sr 3:0:1:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1356K (ffffffff81d1c000 - ffffffff81e6f000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 544K (ffff880001778000 - ffff880001800000)
Freeing unused kernel memory: 480K (ffff880001b88000 - ffff880001c00000)
systemd-udevd[116]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc90010768000, d4:85:64:a3:00:30, XID 04c00000 IRQ 42
usb 2-1: new low-speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=045e, idProduct=00cb
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Microsoft Basic Optical Mouse v2.0
usb 2-1: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:045E:00CB.0001/input/input5
hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1/input0
EXT4-fs (sda6): INFO: recovery required on readonly filesystem
EXT4-fs (sda6): write access will be enabled during recovery
tsc: Refined TSC clocksource calibration: 2799.999 MHz
usb 2-2: new low-speed USB device number 3 using uhci_hcd
usb 2-2: New USB device found, idVendor=04d9, idProduct=1702
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB Keyboard
usb 2-2: Manufacturer:
input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:04D9:1702.0002/input/input6
hid-generic 0003:04D9:1702.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.0-2/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/0003:04D9:1702.0003/input/input7
hid-generic 0003:04D9:1702.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.0-2/input1
Switched to clocksource tsc
random: nonblocking pool is initialized
floppy0: no floppy controllers found
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
Adding 9373692k swap on /dev/sda5. Priority:-1 extents:1 across:9373692k FS
systemd-udevd[333]: starting version 204
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
lp: driver loaded but no devices found
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
[drm] Initialized drm 1.1.0 20060810
ppdev: user-space parallel port driver
systemd-udevd[350]: renamed network interface eth0 to eth1
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000499-0x0000000000000499 (\GPBL) (20140424/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048F-0x000000000000048F (\GPBK) (20140424/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048D-0x000000000000048D (\_SB_.PCI0.SBRG.GPBM) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 500000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
gpio_ich: GPIO from 206 to 255 on gpio_ich
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
floppy0: no floppy controllers found
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
FS-Cache: Loaded
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
init: failsafe main process (785) killed by TERM signal
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
init: idmapd-mounting (/media/1T1M) main process (658) killed by TERM signal
init: idmapd-mounting (/media/1T1NEW) main process (660) killed by TERM signal
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
init: cups main process (1053) killed by HUP signal
init: cups main process ended, respawning
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x2bc offMax=0x1d0a
vboxdrv: TSC mode is Synchronous, tentative frequency 2799998852 Hz
vboxdrv: Successfully loaded version 5.0.10 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
r8169 0000:02:00.0 eth1: link down
r8169 0000:02:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:02:00.0 eth1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
cgroup: systemd-logind (1000) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root
ip_tables: (C) 2000-2006 Netfilter Core Team
init: plymouth-stop pre-start process (1500) terminated with status 1
init: docker.io main process (2081) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2122) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2159) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2190) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2220) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2253) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2283) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2313) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2343) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2376) terminated with status 127
init: docker.io main process ended, respawning
init: docker.io main process (2411) terminated with status 127
init: docker.io respawning too fast, stopped
aufs 3.x-rcN-20140707
Bridge firewalling registered
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
init: docker main process (2085) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3054) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3128) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3196) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3270) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3338) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3410) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3483) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3547) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3611) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3674) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3737) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3802) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3865) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3929) terminated with status 1
init: docker main process ended, respawning
init: docker main process (3992) terminated with status 1
init: docker main process ended, respawning
init: docker main process (4057) terminated with status 1
init: docker main process ended, respawning
init: docker main process (4120) terminated with status 1
init: docker main process ended, respawning
init: docker main process (4183) terminated with status 1
init: docker main process ended, respawning
init: docker main process (4263) terminated with status 1
init: docker main process ended, respawning
init: docker main process (4326) terminated with status 1
init: docker respawning too fast, stopped
perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
systemd-hostnamed[6065]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 77
Raw EDID:
00 ff ff ff ff ff ff 00 4c 2d 87 02 32 32 52 43
30 11 01 03 0c 30 1e 78 2a 93 41 a3 55 4a 98 27
15 50 54 bf ef 80 b3 00 81 80 81 40 71 4f 01 01
01 01 01 01 01 01 21 39 90 30 62 1a 27 40 68 b0
36 00 da 28 11 00 00 1c 00 00 00 fd 00 38 4b 1e
51 0f 00 0a 20 20 20 20 20 20 00 00 00 fc 00 53
79 6e 62 e0 7f ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff